1-2T/H manufactured in China GXP wood waste wood chips crusher wood
grinder
Product Introduction of wood grinder:
The motor and rotor of this series wood grinder installed on the same base. They are directly connected by
coupling. The rotor has been checked by dynamic balance test can
rotate in both of forward backward direction.
There are symmetrical operation door and safety interlock in both
side. The operation doors are helpful to renewal thieve plate and
hammers, also helpful for checking up and debugging. Feed inlet is
placed in the top of crusher which can be matched with all kind of
feed equipment. There is one piece of sieve plate installed at the
bottom of wood hammer mill. The size of crushed material could be
changed by changing different sieve plate with different hole.
Normally, the finished size is from 2mm to 30mm adjustable. Spare parts of hammers and sieve plate are made by our CNC system,
through high technical heat treatment.
The GXP series wood grinder has reasonable structure, sturdy and durable using, safety and
dependable, simple installation, easy operation, tiny vibrating,
high efficiency etc. advantages, which is the most ideal grinding
equipment of all kinds of wood chips, wood shavings, grass, straw,
stalk, corn, weeds, soybean, PVC foaming board, rubber and so on.
Mainly Parameters of wood grinder:
| Model | GXP65*27 | GXP65*55 | GXP65*75 | GXP65*100 | GXP80*100 |
| Diameter of rotor(mm) | 650 | 650 | 650 | 650 | 800 |
| Width of studio(mm) | 275 | 550 | 750 | 1000 | 1000 |
| Rotate speed (r/min) | 2950 | 2950 | 2950 | 1480 | 1480 |
| Spec of screener(mm) | 1340×270 | 1340×400 | 1340×600 | 2730×600 | 2730×600 |
| Spec of hammer(mm) | 180×50×5 | 180×50×5 | 180×50×5 | 180×50×5 | 180×50×5 |
| Qty of hammer(pie) | 24 | 48 | 72 | 96 | 96 |
| Related power(kw) | 22 | 55 | 75 | 90/110 | 132/160 |
| Output(t/h) | 0.5-1 | 1-2 | 2-3 | 3-4/3-5 | 4-6/5-8 |
Photos of wood grinder:
